HIGH-TEMPERATURE PUMPS

Wenesco High-temperature Pumps are used for transferring molten salt, zinc, lead, and other non-viscous material at 700C. These centrifugal pumps, with no seals, require only minimal maintenance. They are available with electric or air motors.                                          TUBE FRAME PUMPS Select 120 or 240V for electric motor Select 304 stainless steel or cast iron construction Starter with thermal protection Discharge: 1.25 NPT Complete air control for air motor 316 SS construction optional at additional cost Gussets for lowering pump during operation VFD Speed control optional at additional cost

Model HTP1  with 1-HP motor	Model HTP1  with air motor	Model HTP2  with 2-HP motor

 

Model height immersion Base dimensions HTP1 40 in 12 in 10 IN  X 7 in HTP2 58 in 24 in 10 IN  X 7 in

MOLTEN SALT PUMPS Molten Salt Pump custom made for mounting in our customer’s tank

This temperature-controlled heated tank, combined with a high temperature pump  delivers molten salt, used as a coolant. to a Molten Salt Reactor. The 316-stainless steel reservoir holds 7-1/2 gallons (120 lb. salt) and will operate up to 700C.  Temperature is controlled with an accurate digital thermostat, while pump speed and flow  are controlled with a Variable Frequency Drive.  Power: 13,800 Watts, 240V single or three-phase.

 

Below, H-Frame pumps for zinc, lead, and other soft metals

H-frame pumps for Zinc and Lead are made to order. STYLE HS has 54 inch maximum immersion. STYLE HL has 81 inch maximum immersion Electric or air motors up to 25 HP Explosion-proof motors. (Class 1,Div 2) is optional Cast iron volute and impeller 304 Stainless steel shaft and frame Heavy duty hooks mounted to frame to raise and lower the pump.

Spine frame pumps are suitable for shorter immersion depths with  a wide selection of motors.

Who uses Wenesco pumps?   Here's a partial list. Terrabon, USA Cinkarna, Slovenia Net Shape Cast, Inc, USA Macit Demir Boru Frofil, Turkey Aircraft Factory, Egypt Xytel, Inc., USA University of Warwick, UK Novi Conslut Srl, Romania Innomation, Inc., USA Pullman Engineering, USA MIT Lincold Fiscal Office, USA Johnson Controls, USA  Maryland Precision Spring USA University of Cal. Riverside, USA J.L. Becker Company, USA Corpacero, S.A., Colombia Hoaphu Co. Ltd., Vietnam Compa S.A., Romania Arcelormittal Skopje (crm) AD, Macedonia Fonderie Generale du Canada, Canada Xyonicz Corporation, USA Surface Modification Systems, USA

FMC Lithium, USA Dynalande, Inc., USA Linco Industries, Inc., USA  Dan Owen USA Snowtech Equipment, India National Tsing Hua University, Taiwan Halo Technics, USA Powerlabs, USA Air Foil Services, Malaysia SkyFuel Company, USA China Rubber Company, China Arkansas State University, USA Sisttemex, Mexico Vulcan Lead, USA George Washington University, USA Burt Process Equipment, USA Envirovac, USA