|
GAS-FIRE MELTERS TO 1000F
| WENESCO GAS-FIRED MELTING POTS FOR SOFT METALS INCLUDING TIN, LEAD, SOLDER, BABBITT, ZINC, PEWTER, CERRO, AND LEAD FREE ALLOYS UNDER 1000F (538C) |
|
All Wenesco melting pots include safety features and comply with all national codes for commercial and industrial gas heating equipment.
Options include: Digital thermostat, Electric Ignition, Heated Drain, Transfer Pump, Stirrer, and more. Please call or write to discuss your special needs.
MPM 1002 gas-fired melter
|
Model MPM 1002 includes heated drain valve. The melter, fully insulated to conserve energy, is equipped with an exhaust fitting ready for connection to an 8-inch duct. The side-mounted digital thermostat may be wired for 120 or 240V and leg length can be changed to suit your requirements. |
| MODEL |
CAPACITY |
SIZE-ID-IN |
SIZE-OD-IN |
BTU |
| MPM 420 |
400 LBS |
13.5 DIA X 11 H |
22 DIA X 34 H |
75,000 |
| MPM 651 |
600 LBS |
16 DIA X 14.5 H |
22 DIA X 34 H |
75,000 |
| MPM 1002 |
1000 LBS |
16 DIA X 17.5 H |
22 DIA X 34 H |
100,000 |
|
| |
|
| |
Custom-Made
Melting Pots |
100 lb propane gas melter for lead, with air motor stirrer and exhaust hood. |
Natural gas-fired wave solder pot for tinning wirecoming through the solder wave off 8 rolls at 50 feet per minute
|
Solder melting pot with special fixturing to solder a commutator to an armature |
This 625,000 BTU melting tank is used for production tinning 6 wires coming off reels . The cast crucible is 72 x 30 x 8 in, and holds 4,600 pounds of tin. The enclosure is made from perforated stainless steel with access panels to the burners |
|
