FLAT SOLDER POTS
|
An alternate method for soldering circuit boards |
ALL WENESCO SOLDER POTS ARE CERAMIC COATED FOR OPERATION WITH STANDARD OR LEAD-FREE ALLOYS
Soldering circuit boards in a shallow pot dates back to the 1950,s and is still a reliable method of low volume soldering of PCB?s. First spray or brush soldering flux on the bottom of the board. Next skim the surface of the pot to clear surface dross (oxidation). Finally, using a"board gripper," dip the board flat into the molten solder. The board will solder in less then 5 seconds. |
Our standard models are thermostat controlled up to 650F.
Specify 120 or 240V. Wenesco welcomes your inquiry for Custom Solder Pots
Model |
Inside size in inches |
Solder
Capacity |
Price |
MPM 16 |
5.75 X 5.25 X 2 |
16 lb |
€756 |
MPM.25 |
5.3 X 9.3 X 2.5 |
25 lb |
€847 |
MPM 32A |
11.75 X 5.37 X 2.5 |
32 lb |
€825 |
MPM 59H |
14 X 14 X 1.75 |
59 lb |
€1,858 |
MPM 225 |
18 X 20 X 3 |
225 lb |
€2,863 |

MPM 16 |

Model MPM 225 with remote digital thermostat |

MPM 25, MPM 32 |
Model MPM 59H shown with T99 adjustable board gripper |
Accessories & Supplies
T99 adjustable board grippers may be used with all flat pots |
€295.00 |
 |
All models thermostat controlled. Dial is numbered 1-10 |
 |
Temperature range:450F- 950F/ Accuracy approx +/- 25F |
 |
Power controls are available to reduce temperature range to 0-850F |
 |
Digital thermostats, (standard on P19D) are available for close temperature
control, temperature display, and expanded range-( 0-950F). |
|
|